Outrage C
Six spinning offshore casting rods, 7'6" to 8'2", throwing 50 to 160 g plugs on PE 2 to 8.
- Models
- 6
- Market
- Japan
- Length
- 7.5'–8.2'
- Type
- Spinning
Offshore casting and popping rods, the plug-throwing half of the high-standard Outrage tier that sits directly below Saltiga. All six are spinning, built as two-piece rods joined above the grip with a V-Joint section, in HVF Nanoplus supported by X45, on a Fuji DPS seat. Ratings follow the Japanese offshore convention rather than the UL-to-XH scale: the digit after the dash is the maximum PE braid class, and the lure rating is a plug weight in grams. The spread is wide. C76-2 at 7'6" (2.29 m) casts to 50 g on PE 2 for Spanish mackerel, mahi and skipjack, C79-3 at 7'9" adds range for larger fish, and C82-4, C82-5, C82-6 and C82-8 all sit at 8'2" (2.49 m) while stepping from 80 g and PE 4 to 160 g and PE 8. Rod weight climbs from 215 g to 380 g across that span, which is the clearest measure of how much blank is added. Daiwa describes the heaviest as a 200 mm plug rod for 20 kg amberjack, giant trevally and tuna, and notes the taper is set to spread fight load rather than to maximize stiffness.
Shaded band: the spread of the lineup's 6 models, as percentile rank among same-type rods. Solid line = series median · dashed ring = catalog median.
Deeper Dive
A closer look at notable models.
A 7'6" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 50 g lures on PE MAX 2.
A 7'9" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 60 g lures on PE MAX 3.
A 8'2" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 80 g lures on PE MAX 4.
A 8'2" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 100 g lures on PE MAX 5.
A 8'2" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 130 g lures on PE MAX 6.
A 8'2" spinning rod from Daiwa's Japanese-market Outrage C lineup, built for offshore GT and tuna popping, in 2 sections, rated for up to 160 g lures on PE MAX 8.
Rods in this series
| Save | Model | Length | Price |
|---|---|---|---|
| C76-2 | 7'6" | Buy from Daiwa | |
| C79-3 | 7'9" | Buy from Daiwa | |
| C82-4 | 8'2" | Buy from Daiwa | |
| C82-5 | 8'2" | Buy from Daiwa | |
| C82-6 | 8'2" | Buy from Daiwa | |
| C82-8 | 8'2" | Buy from Daiwa |